 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FERROXCUBE DATA SHEET E56/24/19 E cores and accessories Supersedes data of September 2004 2008 Sep 01 Ferroxcube E cores and accessories CORE SETS Effective core parameters handbook, halfpage E56/24/19 (E75) 56.1 1 38.1 min. 18.8 0.25 14.6 0.13 23.6 0.25 SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of core half VALUE 0.320 36000 107 337 337 90 UNIT mm-1 mm3 mm mm2 mm2 g 18.8 0.25 CBW070 Dimensions in mm. Fig.1 E56/24/19 core half. Core halves AL measured in combination with a non-gapped core half, clamping force for AL measurements 60 20 N, unless stated otherwise. GRADE 3C81 AL (nH) 100 5%(1) 160 250 400 630 3C90 100 160 315 400 5%(1) 5%(1) 8%(1) 10%(1) 5%(1) 5%(1) 5%(1) 8%(1) e 25 40 63 80 101 159 2400 25 40 63 80 101 159 1740 2400 1320 1740 2400 TOTAL AIR GAP (m) 7780 4160 2320 1720 1280 740 0 7780 4160 2320 1720 1280 740 0 0 0 0 0 TYPE NUMBER E56/24/19-3C81-E100 E56/24/19-3C81-E160 E56/24/19-3C81-E250 E56/24/19-3C81-E315 E56/24/19-3C81-E400 E56/24/19-3C81-E630 E56/24/19-3C81 E56/24/19-3C90-E100 E56/24/19-3C90-E160 E56/24/19-3C90-E250 E56/24/19-3C90-E315 E56/24/19-3C90-E400 E56/24/19-3C90-E630 E56/24/19-3C90 E56/24/19-3C91 E56/24/19-3C92 E56/24/19-3C94 E56/24/19-3C95 315 5%(1) 9500 25% 250 5%(1) 630 10%(1) 6900 25% 3C91 3C92 3C94 3C95 Note 9500 25% 5200 25% 6900 25% 9500 25% 1. Measured in combination with an equal gapped core half. 2008 Sep 01 2 Ferroxcube E cores and accessories Properties of core sets under power conditions B (mT) at GRADE H = 250 A/m; f = 25 kHz; T = 100 C 320 320 320 370 320 320 f = 25 kHz; B = 200 mT; T = 100 C 7.4 3.6 - - - - f = 100 kHz; B = 100 mT; T = 100 C - 4.8 2.7 (1) 3.6 3.6 - CORE LOSS (W) at f = 100 kHz; B = 200 mT; T = 25 C - - - - - 22.7 f = 100 kHz; B = 200 mT; T = 100 C - - 16(1) 22 22 21.6 E56/24/19 (E75) f = 400 kHz; B = 50 mT; T = 100 C - - - - - - 3C81 3C90 3C91 3C92 3C94 3C95 Note 1. Measured at 60 C. 2008 Sep 01 3 Ferroxcube E cores and accessories COIL FORMERS General data for E56/24/19 coil former without pins PARAMETER Coil former material Maximum operating temperature SPECIFICATION E56/24/19 (E75) polyamide (PA6.6), glass reinforced, flame retardant in accordance with "UL 94V-2"; UL file number E41938(M) 130 C, "IEC 60085", class B handbook, full pagewidth 28.3 max. 26 38 max. 19.1 min. 21.4 CBW071 Dimensions in mm. Fig.2 E56/24/19 coil former. Winding data and area product for E56/24/19 coil former without pins NUMBER OF SECTIONS 1 MINIMUM WINDING AREA (mm2) 222 NOMINAL WINDING WIDTH (mm) 26.1 AVERAGE LENGTH OF TURN (mm) 112 AREA PRODUCT Ae x Aw (mm4) 74800 TYPE NUMBER CP-E56/24/19-1S 2008 Sep 01 4 Ferroxcube E cores and accessories General data for 12-pins E56/24/19 coil former PARAMETER Coil former material Maximum operating temperature Pin material Resistance to soldering heat Solderability SPECIFICATION E56/24/19 (E75) Polyamide (PA66), glass reinforced, flame retardant in accordance with "UL 94V-0" ;UL file number E41938 130 C, "IEC 60085", class B copper-zinc alloy (CuZn), tin (Sn) plated "IEC 60068-2-20", Part 2, Test Tb, method 1B: 350 C, 3.5 s "IEC 60068-2-20", Part 2, Test Ta, method 1: 235 C, 2 s handbook, full pagewidth 37.75 max. 19.3 min. 28.19 26.15 37.6 21.4 0.5 4.3 min. 5.1 (1) 0.64 7.6 44.45 33 38.15 max. 2.8 CBW072 (1) one place only Dimensions in mm. Fig.3 E56/24/19 coil former; 12-pins. Winding data and area product for 12-pins E56/24/19 coil former NUMBER OF SECTIONS 1 MINIMUM WINDING AREA (mm 2) 205 NOMINAL WINDING WIDTH (mm) 26.2 AVERAGE LENGTH OF TURN (mm) 114 AREA PRODUCT Ae x Aw (mm4) 69100 TYPE NUMBER CPH-E56/24/19-1S-12PD-Z 2008 Sep 01 5 Ferroxcube E cores and accessories DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS E56/24/19 (E75) This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2008 Sep 01 6 |
Price & Availability of E56-3C81
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |